Legacy edition, no longer supported: SharpShot Vision units shipped before 2026-10 (School and WRO editions) are no longer supported; their guides and examples stay here for reference. To upgrade to the current SharpShot Vision, contact the distributor you bought it from and send it back: the firmware update is free, and the buyer pays shipping both ways.

Looking for the current SharpShot Vision? →Legacy overview

SharpShot Vision (ESP32CAM) × Arduino / ESP32 / UNO R4 (I2C)

Using the SharpShot Vision (ESP32CAM) with Arduino / ESP32 / UNO R4 (I2C): check the edition and the wiring, then pick your software; its page covers that software only.

Arduino / ESP32 / UNO R4 (I2C)

Which edition

Get the Universal I2C edition (4 pins: 5V, GND, SDA, SCL), factory I2C address 0x4C. UNO / Nano: A4 (SDA), A5 (SCL); UNO R4 and ESP32: the pins marked SDA / SCL.

Wiring

SharpShot Vision (ESP32CAM) × Arduino / ESP32 / UNO R4 (I2C)

② Pick your software

Arduino IDECopy an example and upload; every line is commented

Interactive tutorialArduino

No hub needed: click through it in your browser. Pick a function on the left, watch the code or blocks build up on the right, and drag the simulated sensor to see the values.

School editionArduino IDE

WRO editionArduino IDE

Interactive tutorials for all products →

More

Email for a quoteBuying Guide