SharpShot Vision (ESP32CAM) × BBC micro:bit V1 / V2
Using the SharpShot Vision (ESP32CAM) with BBC micro:bit V1 / V2: check the edition and the wiring, then pick your software; its page covers that software only.
Which edition
Get the Universal I2C edition and connect it to the I2C header of a micro:bit breakout (SDA = P20, SCL = P19), factory address 0x4C. It must use an external 5 V supply (ESP32 camera + screen + lights), not the micro:bit 3V pin; share the supply GND with the micro:bit.
Wiring
② Pick your software
Interactive tutorialmicro:bit
No hub needed: click through it in your browser. Pick a function on the left, watch the code or blocks build up on the right, and drag the simulated sensor to see the values.
School editionMakeCode
WRO editionMakeCode